Specification of Harvik Dielectric 9726
Colour
Yellow/Green
Size range
Euro: 36 – 50
Type of construction
Vulcanized Rubber Upper and Sole
Last/Sole Pattern
• Last: VSV
• Sole Pattern: SNV
Speciality
Tested individually boots at 20kV (wet)-ASTM F1117-03 or 37kV (dry)
Recommendation
• For working environment with high voltage hazards
• Power station operations
• The Substation (step-up/step-down/distribution) operations
• Electrical hazards with wet condition/water exposure
• High current leakage hazards
• Electrical installations
Compliance
European Standard CE Approved –
EN 20345:2004 (SB E HRO I)
As/NZS 2210.3:2000 (E HRO)
SB = Basic Protection as per Standard EN ISO 20345
I = Electrically insulating footwear tested as per EN 50321
E = Heel Energy Absorption
/> HRO = Resistance to Hot Contact 300 º C for 60 seconds
SRA = Slip resistance on the ceramic tile floor with Sodium Lauryl Sulphate,
Requirements Heel: CoF > 0.28, flats: Cof > 0.3
CSA Z195-02/ASTM F 3107-05
Class 1 Toe protection
18kV Electric Shock Resistance (ESR) Protection
ASTM F 1117-03
All conform with ASTM F1117 "ASTM F1117-03 Standard Specification for Dielectric Footwear"
100% tested to ASTM F116 @ 20kV
Lining Material
• Selected polyester grade for electrical insulation
• Comes with extra comfort and long-term durability
Upper Construction
• Reinforced upper formulation with a minimum thickness of 1.5 mm
• High visibility with green and yellow contrast
Sole/Heel
• Electrical shock resistance sole suitable for high voltage/current environment
• Fuel oil resistance sole suitable for inimical environment
• Slivulcanized rubber sole resistance p
• Excellent abrasion resistant for extra long-term durability
• Heel energy absorption design to minimize the impact to your heel
• Catered to enter high temperature with HRO performance
Steel Toe Cap
• Non-corrosive coating treatment
• Meets EN ISO 20345 impact and compression tests
• Reliable protection in cold & hot environments
Steel Shank
• Ladder ribbed shank Doubled to strengthen